Design Board “Diamond”

Our Diamond board parquet combines tranquillity and elegance to create a harmonious image. The design is based on the geometry of equilateral triangles, which creates a powerful look.

elegant & progressive

With the “Diamond” parquet board, we have created a timeless floor. The panel consists of five individual pieces of oak. The wood grain of the pieces runs in four different directions, creating the panel appearance. The contrast of each board varies depending on the incidence of light and the distinctness of the grain.

board construction & installation

The parquet consists of a 4 mm wear layer and a 12 mm carrier board. The carrier is a multi-layered birch board. This makes the parquet board almost stress-free and ensures very high dimensional stability. The individual boards are circumferentially grooved and assembled with a foreign tongue during installation.

The individual boards are to be glued over the entire surface. Therefore, it is essential to ensure that the subfloor is completely even. In addition, the moisture content limit of the individual subfloors, such as concrete (85 % RF), floors made of anhydrite (65 % RF) or wood-based boards (8-10 % RF) must not be exceeded. After installation, small joints and hairline cracks are closed with a wood-adhesive mixture and the parquet is sanded. This creates a very homogeneous floor. The surface is then finished with a natural oil or ecological lacquer.