Design board “Leaf”
The inspiration for our “Leaf” board flooring is found in nature, a forest floor covered in leaves. The charm of the board flooring is found in its minimalist elegance.
Our “Leaf” boards express the subtle nuances of nature with the mirrored, laid-together pieces.
Eight individual pieces create the parquet pattern. Fine gradations are created, which express the grace of a huge oak. The board segments look like fine veined leaves when you enter the room.
board construction & installation
The parquet consists of a 4 mm wear layer and a 12 mm carrier board. The carrier is a multi-layered birch board. This makes the parquet board almost stress-free and ensures very high dimensional stability. The individual boards are circumferentially grooved and assembled with a foreign tongue during installation.
The individual boards are to be glued over the entire surface. Therefore, it is essential to ensure that the subfloor is completely even. In addition, the moisture content limit of the individual subfloors, such as concrete (85 % RF), floors made of anhydrite (65 % RF) or wood-based boards (8-10 % RF) must not be exceeded. After installation, small joints and hairline cracks are closed with a wood-adhesive mixture and the parquet is sanded. This creates a very homogeneous floor. The surface is then finished with a natural oil or ecological lacquer.